Lehigh Safety Shoes Unisex 12-Inch Steel Toe Dielectric Waterproof Rubber Work Boots
















If you need a dielectric boot, you will want the Lehigh Safety Shoes Unisex Steel Toe Rubber Waterproof Dielectric Work Boot.
Lehigh Safety Shoes has been providing protective toe safety shoes since the early 1920's initially under the name of Lehigh Rubber and Leather Company.
The most significant feature of the Lehigh Safety Shoes Unisex Steel Toe Dielectric Waterproof Work Boot is that each boot is hydroshock tested to 2500 volts DC with less than 5 micro amps of current leakage.
A key comfort feature of the 3149 is its contoured removable polyurethane cushion insole providing direct underfoot cushion comfort. The polyurethane material used in its insole is known for its cushioning while not bottoming out features. Some open celled foams feel very comfortable to the initial touch, but will tend to break down faster than a product made with polyurethane. Plus, it is extra thick in the heel contact area. This provides additional underfoot comfort to the wearer.
In addition to meeting the highest ASTM F2413-11 Impact & Compression standards, Lehigh stock # 3149 also complies with its Electrical Hazard standards. And this boot meets EN 50321:18 standards, earning a Class 0 rating. This type of work boot is made with insulating bottoms providing secondary electrical hazard protection to those areas dealing with open circuits under dry conditions in addition to its hydroshock properties noted above. Plus, it also can be worn in work areas requiring only basic protective toe work boots.
If your work includes the potential to accidental exposure to live electricity, be protected in your very own pair of dielectric boots. Order today.
-
Protective Toe
Impact testing determines the amount of protection to the toe under various foot pounds of force. Compression testing determines the amount of static pressure a steel/composite toe cap can withstand. Our boots are I75/C75Electrical Hazard
Footwear is built with nail-free construction to help insulate you from the ground to slow down conduction, but is not intended to be primary protection against electric shock. Leather footwear must be dry. Our electrical hazard boots meet and exceed ASTM electrical hazard standards.Waterproof
This product is built with quality waterproofing materials to keep you dry in wet environments. -
- Steel shank
- Waterproof
- ASTM F2413 protective toe classification
- ASTM F2413 electrical hazard standard
- 12 inches in height
- Shaft height and circumference may vary by size
- 16-inch calf circumference
- Weight: 5.1 pounds per pair for a size 10
- Dielectric Boot
- Unisex sizing — Men's sizes shown; women should subtract 1 1/2 sizes from their current shoe size
- EN 50321:18, Class 0 standard for Dielectric Footwear
Footwear Size Charts
Men's
Women's
Apparel Size Charts
(Rain Pants)
Size
Size
Height (in)
Weight(lbs)
Size
to ankle
to sole
Doesn't Fit?
If it doesn't fit, return the unwashed and unworn product within 28 days using our FREE RETURNS process for a full refund.
See Returns Policy or Create A Return